Aircon Installation Singapore

aircon installation

MID-WALL SPLIT SYSTEMS / SYSTEMS

Mid wall split systems/system should be affixed (installed) to a wall. They get the name “split unit/system” from the method they are constructed – with half of the system mounted inside the home/workplace, and the other half mounted outside.

 

Consists of:
Evaporator (indoor- system) mounted to inside wall of room/workplace.

Condenser (outdoor-unit) mounted onto a set of brackets, on same outside wall within a 3-meter radius from the evaporator (indoor-unit).

Condenser (outdoor-unit) mounted on the floor within 3 meters from inside.

Electrical connections to existing power point up to 5 meters for Air-conditioners from 9 000 BTU to 18 000 BTU (Space sizes up-to 36 m ²)

Installment time approximately 2-3 hours.

 

Excludes:.
In case of condensation water not able to not drain easily from the indoor facility (Evaporator) to outside, a condensation pump will be needed at an extra cost.
Electrical connections to existing power point more than 5 meters (Charged individually per meter afterward) for space sizes up-to 36 m ²

 

CASSETTE SPLIT SYSTEMS / SYSTEMS
Cassette split systems / system have to be affixed (set up) to a ceiling. They get the name “split unit/system” from the method they are built – with half of the facility mounted into a ceiling inside the house / workplace, and the other half mounted outdoors.

 

Includes:.
Evaporator (indoor-unit) mounted to the ceiling of space/workplace.

Condenser (outdoor-unit) mounted onto a set of brackets, on an outside wall within 5 meters from the evaporator (indoor-unit).

Condenser (outdoor-unit) mounted on the floor within 5 meters from the evaporator (indoor-unit).

Cassette split facilities / systems are produced with an inbuilt condensation pump and therefore do not require a cost-free running drain line to the beyond the room/office.

Electrical connections to existing power point up to 5 meters for Air-conditioners from 9 000 BTU to 18 000 BTU (Space sizes up-to 36 m ²)
Setup time around 2-3 hours.

 

Excludes:
Electrical connections to existing power point more than 5 meters (Charged independently per meter afterward) for room sizes up-to 36 m
Required by law, electrical connections for air-conditioners from 24 000 BTU and bigger (room sizes going beyond 37 m ²) to be performed by a qualified electrician from circulation board (not included in installation costs).

 

About Coolinger
Coolinger is one of the most trusted Aircon Servicing, Repair, Installation & Maintenance companies in Singapore, we have been providing reliable and effective air conditioning services in this region using the latest equipment and technologies since 1997. Our team of experienced and skilled personnel is committed to providing you with great cooling solutions effectively and hassle-free way.

 

 

Leave a Reply

Your email address will not be published.